IELTS Test format|Get Prepare for your IELTS test

IELTS Test format | Prepare for your IELTS test The IELTS test assesses your abilities in listening, reading, writing and speaking – in less than three hours.

Table of Contents

Book your test now

Haven’t booked your test yet?

There are two types of IELTS: Academic and General Training. Listening and Speaking are the same for both tests, but the subject matter of the Reading and Writing sections differs depending on which test you take.

The Listening, Reading and Writing sections of all IELTS tests are completed on the same day, with no breaks in between them.

The Speaking section, however, can be completed up to a week before or after the other tests. Your test centre will advise.

The total test time is 2 hours and 45 minutes.

Test format – Listening

30 minutes

You will listen to four recordings of native English speakers and then write your answers to a series of questions.

Recording 1 – a conversation between two people set in an everyday social context.
Recording 2 – a monologue set in an everyday social context, e.g. a speech about local facilities.
Recording 3 – a conversation between up to four people set in an educational or training context, e.g. a university tutor and a student discussing an assignment.
Recording 4 – a monologue on an academic subject, e.g. a university lecture.

Assessors will be looking for evidence of your ability to understand the main ideas and detailed factual information, the opinions and attitudes of speakers, the purpose of an utterance and evidence of your ability to follow the development of ideas.

IELTS Listening description


Paper format	From 4 January 2020, some small changes were introduced to the instructions and layout of the paper-based Listening test: The word ‘Sections’ was changed to ‘Parts’ – The paper-based test will now be divided into Part 1, 2, 3, 4. The Part 1 example was removed. We have also removed the page number references. There are four parts with ten questions each. The questions are designed so that the answers appear in the order they are heard in the audio. The first two parts deal with situations set in everyday social contexts. In Part 1, there is a conversation between two speakers (for example, a conversation about travel arrangements), and in Part 2, there is a monologue in (for example, a speech about local facilities). The final two parts deal with situations set in educational and training contexts. In Part 3, there is a conversation between two main speakers (for example, two university students in discussion, perhaps guided by a tutor), and in Part 4, there is a monologue on an academic subject. The recordings are heard only once. They include a range of accents, including British, Australian, New Zealand, American and Canadian.
Timing	Approximately 30 minutes (plus 10 minutes transfer time).
No. of questions	40
Task types	A variety of question types are used, chosen from the following: multiple choice, matching, plan/map/diagram labelling, form/note/table/flow-chart/summary completion, sentence completion.
Answering	Test takers write their answers on the question paper as they listen and at the end of the test are given 10 minutes to transfer their answers to an answer sheet. Care should be taken when writing answers on the answer sheet as poor spelling and grammar are penalised.
Marks	Each question is worth 1 mark.

IELTS Listening in detail

A detailed look at the paper with links to related resources.

Task type 1 – Multiple choice

Task type and format	In multiple choice tasks, there is a question followed by three possible answers, or the beginning of a sentence followed by three possible ways to complete the sentence. Test takers are required to choose the one correct answer – A, B or C. Sometimes, test takers are given a longer list of possible answers and told that they have to choose more than one. In this case, they should read the question carefully to check how many answers are required.
Task focus	Multiple choice questions are used to test a wide range of skills. The test taker may be required to have a detailed understanding of specific points or an overall understanding of the main points of the listening text.
No. of questions	Variable

Task type and format

In multiple choice tasks, there is a question followed by three possible answers, or the beginning of a sentence followed by three possible ways to complete the sentence. Test takers are required to choose the one correct answer – A, B or C.

Sometimes, test takers are given a longer list of possible answers and told that they have to choose more than one. In this case, they should read the question carefully to check how many answers are required.

Task focus

Multiple choice questions are used to test a wide range of skills. The test taker may be required to have a detailed understanding of specific points or an overall understanding of the main points of the listening text.

No. of questions

Variable

Task type 2 – Matching

Task type and format	Test takers are required to match a numbered list of items from the listening text to a set of options on the question paper. The set of options may be criteria of some kind.
Task focus	Matching assesses the skill of listening for detail and whether a test taker can understand information given in a conversation on an everyday topic, such as the different types of hotel or guest house accommodation. It also assesses the ability to follow a conversation between two people. It may also be used to assess test takers’ ability to recognise relationships and connections between facts in the listening text.
No. of questions	Variable

Task type 3 – Plan, map, diagram labelling

Task type and format	Test takers are required to complete labels on a plan (eg of a building), map (eg of part of a town) or diagram (e.g. of a piece of equipment). The answers are usually selected from a list on the question paper.
Task focus	This type of task assesses the ability to understand, for example, a description of a place, and to relate this to a visual representation. This may include being able to follow language expressing spatial relationships and directions (e.g. straight on/through the far door).
No. of questions	Variable

Task type 4 – Form, note, table, flow-chart, summary completion

Task type and format	Test takers are required to fill in the gaps in an outline of part or of all of the listening text. The outline will focus on the main ideas/facts in the text. It may be: 1. a form: often used to record factual details such as names 2. a set of notes: used to summarise any type of information using the layout to show how different items relate to one another 3. a table: used as a way of summarising information which relates to clear categories – e.g. place/time/price, 4. a flow-chart: used to summarise a process which has clear stages, with the direction of the process shown by arrows. Test takers may have to select their answers from a list on the question paper or identify the missing words from the recording, keeping to the word limit stated in the instructions. Test takers do not have to change the words from the recording in any way. Test takers should read the instructions very carefully as the number of words or numbers they should use to fill the gaps will vary. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. Test takers are penalised for writing more than the stated number of words, and test takers should check this word limit carefully for each task. Contracted words will not be tested. Hyphenated words count as single words.
Task focus	This focuses on the main points which a listener would naturally record in this type of situation.
No. of questions	Variable

Task type and format

Test takers are required to fill in the gaps in an outline of part or of all of the listening text. The outline will focus on the main ideas/facts in the text. It may be:
1. a form: often used to record factual details such as names
2. a set of notes: used to summarise any type of information using the layout to show how different items relate to one another
3. a table: used as a way of summarising information which relates to clear categories – e.g. place/time/price,
4. a flow-chart: used to summarise a process which has clear stages, with the direction of the process shown by arrows.

Test takers may have to select their answers from a list on the question paper or identify the missing words from the recording, keeping to the word limit stated in the instructions. Test takers do not have to change the words from the recording in any way.

Test takers should read the instructions very carefully as the number of words or numbers they should use to fill the gaps will vary. A word limit is given, for example, ‘NO MORE THAN TWO WORDS AND/OR A NUMBER’. Test takers are penalised for writing more than the stated number of words, and test takers should check this word limit carefully for each task. Contracted words will not be tested. Hyphenated words count as single words.

Task focus

This focuses on the main points which a listener would naturally record in this type of situation.

No. of questions

Variable

Task type 5 – Sentence completion

Task type and format	Test takers are required to read a set of sentences summarising key information from all the listening text or from one part of it. They then fill a gap in each sentence using information from the listening text. A word limit is given, for example, ‘NO MORE THAN ONE WORD AND/OR A NUMBER’. Test takers are penalised for writing more than the stated number of words. (Test takers should check this word limit carefully for each task: the limit is either ONE, TWO or THREE words). Contracted words will not be tested. Hyphenated words count as single words.
Task focus	Sentence completion focuses on the ability to identify the key information in a listening text. Test takers have to understand functional relationships such as cause and effect.
No. of questions	Variable

Task type and format

Test takers are required to read a set of sentences summarising key information from all the listening text or from one part of it. They then fill a gap in each sentence using information from the listening text. A word limit is given, for example, ‘NO MORE THAN ONE WORD AND/OR A NUMBER’.

Test takers are penalised for writing more than the stated number of words. (Test takers should check this word limit carefully for each task: the limit is either ONE, TWO or THREE words). Contracted words will not be tested. Hyphenated words count as single words.

Task focus

Sentence completion focuses on the ability to identify the key information in a listening text. Test takers have to understand functional relationships such as cause and effect.

No. of questions

Variable

Task type 6 – Short-answer questions

Task type and format	Test takers are required to read a question and then write a short answer using information from the listening text. A word limit is given, for example, ‘NO MORE THAN THREE WORDS AND/OR A NUMBER’. Test takers are penalised for writing more than the stated number of words. (Test takers should check this word limit carefully for each task.) Contracted words will not be tested. Hyphenated words count as single words. Sometimes test takers are given a question which asks them to list two or three points.
Task focus	Sentence completion focuses on the ability to listen for concrete facts, such as places, prices or times, within the listening text.
No. of questions	Variable

IELTS Listening – how it’s marked

The Listening test is marked by certificated markers, who are regularly monitored to ensure their reliability. All answer sheets, after being marked, are further analysed by Cambridge Assessment English.

Also apply for these:

Study In UK Oxford University: The Weidenfeld-Hoffmann Scholarships and Leadership Programme

The European Space Agency (ESA) Student Internship Program 2021

The U.S. MEPI Tomorrow’s Leaders Undergraduate Scholarship Program 2021

DAAD Distance Learning Scholarship 2020 Germany (Fully Funded)

Study in Australia Deakin University Fully Funded Scholarship 2020

Fully Funded Global leadership Scholarship 2021- For Undergraduate & Graduates

Band score conversion

A Band Score conversion table is produced for each version of the Listening test which translates scores out of 40 into the IELTS 9-band scale. Scores are reported in whole bands and half bands.

One mark is awarded for each correct answer in the 40-item test. Care should be taken when writing answers on the answer sheet as poor spelling and grammar are penalised.